≡

Antibody Pairs Support Pack 2

Instruction manual

First Edition (Revised on April, 2016)

[PRODUCT INFORMATION]

Antibody Pairs Support Pack is intended to use together with Antibody Pairs for ELISA/CLIA kit preparation. This pack provides reagents for preparation of 10 Competitive ELISA/CLIA plates. All reagents should be used at room temperature and the pack is intended for research purposes only.

[REAGENTS AND MATERIALS PROVIDED]

Reagents

Quantity

Coating Buffer

1 bottle of powder

Blocking Buffer

1 bottle of powder

Standard Diluent 

1 bottle of powder

Biontin-labeled Competitor Diluent 

1 bottle of powder

Streptavidin-HRP Diluent

1 bottle of powder

Wash Buffer

2 bottles of powder

Streptavidin-HRP

1 bottle, 1.2ml

Substrate Solution

2 bottles, 48ml each

Stop Solution

2 bottles, 30ml each

[APPLICATIONS]

Reagents

Applications

Coating Buffer 

Used for coating antibody on the wells of 96-well strip plate. Prepare a working solution by diluting the Coating Buffer with deionized or distilled water before the experiment. 1 bottle of Coating Buffer can be used for preparing 220ml working solution. 


Blocking Buffer 

Used for blocking of unspecific binding sites of the plate. Prepare a working solution by diluting the Blocking Buffer with deionized or distilled water before the experiment. 1 bottle of Blocking Buffer can be used for preparing 240ml working solution.

Standard Diluent 

Used for dilution of Standard. Prepare a working solution by diluting the Standard Diluent with deionized or distilled water before the experiment. 1 bottle of Standard Diluent can be used for preparing 160ml working solution.

Biontin-labeled Competitor Diluent


Used for dilution of Biotin-labeled Competitor. Prepare a working solution by diluting the Biotin-labeled Competitor Diluent with deionized or distilled water before the experiment. 1 bottle can be used for preparing 120ml working solution.

Streptavidin-HRP Diluent

Used for dilution of Streptavidin-HRP. Prepare a working solution by diluting the Strepavidin-HRP Diluent  with deionized or distilled water before the experiment. 1 bottle can be used for preparing 120ml working solution.

Wash Buffer

For plate washing. Prepare a working solution by diluting the Wash Buffer with deionized or distilled water before the experiment. 1 bottle can be used for preparing 2000mL working solution.

Streptavidin-HRP

Strepavidin-HRP can specifically bind biotinylated antigens or antibodies. Prepare a working solution by diluting the Streptavidin-HRP with Streptavidin-HRP Diluent working solution. The dilution ratio was 1:100. 1 bottle can be used for preparing 120ml working solution.

Substrate Solution

Used for chromogenic substrate.

Stop Solution

Used for stopping chromogenic reaction.

NOTE: *All of the working solutions should be clear.

      *If the working solution is prepared, please store at 2-8ºC.


[STORAGE]

Streptavidin-HRP should be stored at -20℃, others are valid for 6 months at 4℃. Store diluted (reconstituted powder) or working solutions at 4 ℃ for up to one week for use in subsequent experiments.

[IMPORTANT NOTES]

Appropriate care should be exercised when using these reagents, including gloves, glasses, lab coats, and good laboratory procedures.