ELISA Kit for Taurine (Tau)

2-Aminoethanesulfonic Acid; Tauric Acid

Specificity

This assay has high sensitivity and excellent specificity for detection of Taurine (Tau).
No significant cross-reactivity or interference between Taurine (Tau) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of Taurine (Tau) and the recovery rates were calculated by comparing the measured value to the expected amount of Taurine (Tau) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 78-103 98
EDTA plasma(n=5) 85-99 88
heparin plasma(n=5) 97-104 101

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Taurine (Tau) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Taurine (Tau) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Taurine (Tau) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 97-104% 78-99% 90-104% 78-101%
EDTA plasma(n=5) 81-99% 85-96% 92-105% 80-89%
heparin plasma(n=5) 82-99% 92-105% 84-103% 80-103%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1 Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Reagent Diluent 1×300µL Stop Solution 1×6mL
TMB Substrate 1×9mL Instruction manual 1
Wash Buffer (30 × concentrate) 1×20mL

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Journal of Hainan Medical University Value of serum glucagon like peptide-1 detection in assessment of Alzheimer's disease PDF:201604
海南医学院学报 血清胰高血糖素样肽1 检测对阿尔茨海默病情评估的价值 zw:201604
ACTA HISTOCHEMICA Melatonin ameliorates diabetes-induced brain injury in rats 33401187
Arch. Anim. Breed The effect of genotype and muscle type on the physico-chemical characteristics and taurine, carnosine and L-carnitine concentration in lamb meat 33473367
Journal of Personalized Medicine Gut Microbiota as Early Predictor of Infectious Complications before Cardiac Surgery: A Prospective Pilot Study 34834465
Novel urinary markers: taurine, dopamine and L-fucose levels in predicting neonatal seizures
Catalog No. Related products for research use of Pan-species (General) Organism species Applications (RESEARCH USE ONLY!)
CPV538Ge21 OVA Conjugated Taurine (Tau) Immunogen; SDS-PAGE; WB.
PAV538Ge01 Polyclonal Antibody to Taurine (Tau) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
CEV538Ge ELISA Kit for Taurine (Tau) Enzyme-linked immunosorbent assay for Antigen Detection.
LMV538Ge Multiplex Assay Kit for Taurine (Tau) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSV538Ge11 ELISA Kit DIY Materials for Taurine (Tau) Main materials for "Do It (ELISA Kit) Yourself".