Packages (Simulation)
Reagent Preparation
Image (I)
Image (II)
Certificate
Multiplex Assay Kit for Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay)
ECGF; AFGF; ECGFA; ECGFB; FGF-Alpha; FGFA; HBGF1; ECGFB; HBGF1; Acidic Fibroblast Growth Factor; heparin-binding growth factor 1; Endothelial Cell Growth Factor, Beta
(Note: Up to 8-plex in one testing reaction)
- Product No.LMA032Ov
- Organism SpeciesOvis aries; Ovine (Sheep) Same name, Different species.
- Sample TypeSerum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Test MethodCompetitive Inhibition
- Assay Length1.5h
- Detection Range0.1-100ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.033 ng/mL.
- DownloadInstruction Manual
- UOM 8Plex 7Plex 6Plex 5Plex 4Plex 3Plex 2Plex1Plex
- FOB
US$ 498
US$ 517
US$ 546
US$ 584
US$ 623
US$ 680
US$ 766
Result
For more details, please contact local distributors! US$ 958 Add to Price Calculator
Specificity
This assay has high sensitivity and excellent specificity for detection of Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay).
No significant cross-reactivity or interference between Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) and analogues was observed.
Recovery
Matrices listed below were spiked with certain level of recombinant Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) and the recovery rates were calculated by comparing the measured value to the expected amount of Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) in samples.
Matrix | Recovery range (%) | Average(%) |
serum(n=5) | 80-89 | 86 |
EDTA plasma(n=5) | 91-101 | 96 |
heparin plasma(n=5) | 85-98 | 90 |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Linearity
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample | 1:2 | 1:4 | 1:8 | 1:16 |
serum(n=5) | 80-103% | 95-102% | 89-102% | 88-97% |
EDTA plasma(n=5) | 85-99% | 99-105% | 92-105% | 97-105% |
heparin plasma(n=5) | 87-101% | 93-105% | 96-104% | 90-104% |
Stability
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Reagents and materials provided
Reagents | Quantity | Reagents | Quantity |
96-well plate | 1 | Plate sealer for 96 wells | 4 |
Pre-Mixed Standard | 2 | Standard Diluent | 1×20mL |
Pre-Mixed Magnetic beads (22#:FGF1) | 1 | Analysis buffer | 1×20mL |
Pre-Mixed Detection Reagent A | 1×120μL | Assay Diluent A | 1×12mL |
Detection Reagent B (PE-SA) | 1×120μL | Assay Diluent B | 1×12mL |
Sheath Fluid | 1×10mL | Wash Buffer (30 × concentrate) | 1×20mL |
Instruction manual | 1 |
Assay procedure summary
1. Preparation of standards, reagents and samples before the experiment;
2. Add 50μL standard or sample to each well,
add 10μL magnetic beads,and 50μL Detection Reagent A,incubate 60min at 37°C on shaker;
3. Wash plate on magnetic frame for three times;
4. Add 100μL prepared Detection Reagent B, and incubate 30 min at 37°C on shaker;
5. Wash plate on magnetic frame for three times;
6. Add 100μL sheath solution, swirl for 2 minutes, read on the machine.
GIVEAWAYS
INCREMENT SERVICES
Magazine | Citations |
Tissue Engineering Part A | Tissue Inhibitor of Metalloproteinase-1 and -3 Improves Cardiac Function in an Ischemic Cardiomyopathy Model Rat Pubmed:24814095 |
24 | Fibroblast growth factor 1 ameliorates diabetic nephropathy by an anti-inflammatory mechanism. pubmed:28750927 |
Endocrine Connections | Characterization of fibroblast growth factor 1 in obese children and adolescents Pubmed:29991637 |
Molecular Medicine Reports | Long non‑coding RNA NORAD regulates angiogenesis of human umbilical vein endothelial cells via miR‑590‑3p under hypoxic conditions Pubmed: 32323787 |
Annals of Agricultural and Environmental Medicine | Oxidative stress-induced growth inhibitor 1 in alcohol-induced liver cirrhosis 34969228 |
World J Hepatol | Leukocyte cell-derived chemotaxin-2 and fibroblast growth factor 21 in alcohol-induced liver cirrhosis Pubmed:35070009 |
Catalog No. | Related products for research use of Ovis aries; Ovine (Sheep) Organism species | Applications (RESEARCH USE ONLY!) |
RPA032Ov01 | Recombinant Fibroblast Growth Factor 1, Acidic (FGF1) | Positive Control; Immunogen; SDS-PAGE; WB. |
PAA032Ov01 | Polyclonal Antibody to Fibroblast Growth Factor 1, Acidic (FGF1) | WB; IHC; ICC; IP. |
SEA032Ov | ELISA Kit for Fibroblast Growth Factor 1, Acidic (FGF1) | Enzyme-linked immunosorbent assay for Antigen Detection. |
LMA032Ov | Multiplex Assay Kit for Fibroblast Growth Factor 1, Acidic (FGF1) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |
CGA032Ov01 | cDNA of Fibroblast Growth Factor 1, Acidic (FGF1) | PCR; Protein Expression; etc. |