≡

CLIA Kit for Ficolin 1 (FCN1)

FCNM; Collagen/fibrinogen domain-containing protein 1; Ficolin-alpha; Ficolin-A; M-ficolin

Specificity

This assay has high sensitivity and excellent specificity for detection of Ficolin 1 (FCN1).
No significant cross-reactivity or interference between Ficolin 1 (FCN1) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Ficolin 1 (FCN1) and the recovery rates were calculated by comparing the measured value to the expected amount of Ficolin 1 (FCN1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 79-94 91
EDTA plasma(n=5) 91-98 94
heparin plasma(n=5) 82-96 93

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Ficolin 1 (FCN1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Ficolin 1 (FCN1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Ficolin 1 (FCN1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 90-104% 81-103% 87-101% 84-94%
EDTA plasma(n=5) 79-95% 91-101% 81-88% 96-104%
heparin plasma(n=5) 78-98% 78-89% 89-101% 84-98%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
ACTA TROPICA Novel findings on the role of ficolins and colectins in the innate response against Leishmania braziliensis Pubmed: 32827456
LIFE SCIENCES The lectin pathway of complement and the initial recognition of Leishmania infantum promastigotes 34242658
Catalog No. Related products for research use of Rattus norvegicus (Rat) Organism species Applications (RESEARCH USE ONLY!)
RPA786Ra01 Recombinant Ficolin 1 (FCN1) Positive Control; Immunogen; SDS-PAGE; WB.
PAA786Ra01 Polyclonal Antibody to Ficolin 1 (FCN1) WB; IHC; ICC; IP.
MAA786Ra21 Monoclonal Antibody to Ficolin 1 (FCN1) WB; IHC; ICC; IP.
SEA786Ra ELISA Kit for Ficolin 1 (FCN1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA786Ra CLIA Kit for Ficolin 1 (FCN1) Chemiluminescent immunoassay for Antigen Detection.
LMA786Ra Multiplex Assay Kit for Ficolin 1 (FCN1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA786Ra01 ELISA Kit DIY Materials for Ficolin 1 (FCN1) Main materials for "Do It (ELISA Kit) Yourself".