≡

CLIA Kit for 3-Oxoacid Coenzyme A Transferase 1 (OXCT1)

OXCT; SCOT; Succinyl-CoA:3-Ketoacid-Coenzyme A Transferase 1,Mitochondrial; Somatic-type succinyl-CoA:3-oxoacid CoA-transferase

Specificity

This assay has high sensitivity and excellent specificity for detection of 3-Oxoacid Coenzyme A Transferase 1 (OXCT1).
No significant cross-reactivity or interference between 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
Substrate A 1×10mL Substrate B 1×2mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

GIVEAWAYS

INCREMENT SERVICES

Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPH480Hu01 Recombinant 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) Positive Control; Immunogen; SDS-PAGE; WB.
PAH480Hu01 Polyclonal Antibody to 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) WB; IHC; ICC; IP.
MAH480Hu21 Monoclonal Antibody to 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) WB; IHC; ICC; IP.
SEH480Hu ELISA Kit for 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCH480Hu CLIA Kit for 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) Chemiluminescent immunoassay for Antigen Detection.
LMH480Hu Multiplex Assay Kit for 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSH480Hu01 ELISA Kit DIY Materials for 3-Oxoacid Coenzyme A Transferase 1 (OXCT1) Main materials for "Do It (ELISA Kit) Yourself".