≡

ELISA Kit for Moesin (MSN)

Membrane-Organizing Extension Spike Protein

Specificity

This assay has high sensitivity and excellent specificity for detection of Moesin (MSN).
No significant cross-reactivity or interference between Moesin (MSN) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Moesin (MSN) and the recovery rates were calculated by comparing the measured value to the expected amount of Moesin (MSN) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 98-105 101
EDTA plasma(n=5) 86-94 89
heparin plasma(n=5) 85-99 95

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Moesin (MSN) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Moesin (MSN) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Moesin (MSN) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 81-101% 80-91% 86-97% 86-101%
EDTA plasma(n=5) 81-98% 98-105% 99-105% 79-101%
heparin plasma(n=5) 80-95% 92-102% 99-105% 92-102%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
PLoS One Presence in the Pre-Surgical Fine-Needle Aspiration of Potential Thyroid Biomarkers Previously Identified in the Post-Surgical One PubMed: PMC3765839
PLoS One.? Proteomic Profiles in Acute Respiratory Distress Syndrome Differentiates Survivors from Non-Survivors Pubmed:25290099
Bhargava, Maneesh Proteomic Studies in Acute Hypoxic Respiratory Failure Handle: 11299
Translational Research Proteomic analysis of fine-needle aspiration in differential diagnosis of thyroid nodules Pubmed:27172385
Comparative Evaluation of Membrane-Organizing Extension Spike Protein in Gingival Crevicular Fluid in Individuals with and Without Severe Chronic …
Journal of Immunology Research Moesin Is a Novel Biomarker of Endothelial Injury in Sepsis 33628853
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
PAC642Mu01 Polyclonal Antibody to Moesin (MSN) WB; IHC; ICC; IP.
SEC642Mu ELISA Kit for Moesin (MSN) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC642Mu Multiplex Assay Kit for Moesin (MSN) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.