≡

ELISA Kit for Arginase II (Arg2)

Kidney-type arginase; Non-hepatic arginase

Specificity

This assay has high sensitivity and excellent specificity for detection of Arginase II (Arg2).
No significant cross-reactivity or interference between Arginase II (Arg2) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of recombinant Arginase II (Arg2) and the recovery rates were calculated by comparing the measured value to the expected amount of Arginase II (Arg2) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 92-101 96
EDTA plasma(n=5) 99-105 102
heparin plasma(n=5) 90-98 95

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Arginase II (Arg2) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Arginase II (Arg2) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Arginase II (Arg2) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 83-102% 97-105% 87-96% 80-102%
EDTA plasma(n=5) 89-101% 81-101% 80-96% 80-90%
heparin plasma(n=5) 89-103% 81-101% 99-105% 98-105%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Eurasian J Pulmonol Effects of Varenicline on Cardiovascular Parameters and Oxidative Stress _19_1_8_12.pdf
Catalog No. Related products for research use of Mus musculus (Mouse) Organism species Applications (RESEARCH USE ONLY!)
RPD796Mu01 Recombinant Arginase II (Arg2) Positive Control; Immunogen; SDS-PAGE; WB.
RPD796Mu02 Recombinant Arginase II (Arg2) Positive Control; Immunogen; SDS-PAGE; WB.
PAD796Mu01 Polyclonal Antibody to Arginase II (Arg2) WB; IHC; ICC; IP.
PAD796Mu02 Polyclonal Antibody to Arginase II (Arg2) WB; IHC; ICC; IP.
LAD796Mu81 FITC-Linked Polyclonal Antibody to Arginase II (Arg2) WB; IHC; ICC; IF.
LAD796Mu71 Biotin-Linked Polyclonal Antibody to Arginase II (Arg2) WB; IHC; ICC.
SED796Mu ELISA Kit for Arginase II (Arg2) Enzyme-linked immunosorbent assay for Antigen Detection.
LMD796Mu Multiplex Assay Kit for Arginase II (Arg2) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSD796Mu01 ELISA Kit DIY Materials for Arginase II (Arg2) Main materials for "Do It (ELISA Kit) Yourself".