≡

ELISA Kit for Vitamin B1 (VB1)

Thiamine; Thiamin; Aneurine

Specificity

This assay has high sensitivity and excellent specificity for detection of Vitamin B1 (VB1).
No significant cross-reactivity or interference between Vitamin B1 (VB1) and analogues was observed.

Recovery

Matrices listed below were spiked with certain level of Vitamin B1 (VB1) and the recovery rates were calculated by comparing the measured value to the expected amount of Vitamin B1 (VB1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 93-101 98
EDTA plasma(n=5) 80-91 87
heparin plasma(n=5) 80-88 83

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Vitamin B1 (VB1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Vitamin B1 (VB1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Vitamin B1 (VB1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 94-102% 85-92% 84-94% 78-105%
EDTA plasma(n=5) 92-101% 84-98% 83-104% 91-102%
heparin plasma(n=5) 91-98% 92-105% 96-103% 88-99%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Genes and Immunity Identification of critical variants within SLC44A4, an ulcerative colitis susceptibility gene identified in a GWAS in north Indians Pubmed:26741288
畜牧兽医学报 日粮不同钴水平对奶牛泌乳性能, 营养物质消化率和血液生化指标的影响
Biomedicines Disinhibition-Like Behavior Correlates with Frontal Cortex Damage in an Animal Model of Chronic Alcohol Consumption and Thiamine Deficiency Pubmed:35203470
Catalog No. Related products for research use of Pan-species (General) Organism species Applications (RESEARCH USE ONLY!)
CPD053Ge11 BSA Conjugated Vitamin B1 (VB1) Immunogen; SDS-PAGE; WB.
CPD053Ge21 OVA Conjugated Vitamin B1 (VB1) Immunogen; SDS-PAGE; WB.
PAD053Ge01 Polyclonal Antibody to Vitamin B1 (VB1) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
CED053Ge ELISA Kit for Vitamin B1 (VB1) Enzyme-linked immunosorbent assay for Antigen Detection.
CCD053Ge CLIA Kit for Vitamin B1 (VB1) Chemiluminescent immunoassay for Antigen Detection.
LMD053Ge Multiplex Assay Kit for Vitamin B1 (VB1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSD053Ge11 ELISA Kit DIY Materials for Vitamin B1 (VB1) Main materials for "Do It (ELISA Kit) Yourself".