≡

ELISA Kit for Fibroblast Activation Protein Alpha (FAPa)

APCE; SIMP; DPPIV; Seprase; 170 kDa melanoma membrane-bound gelatinase; Post-proline cleaving enzyme; Serine integral membrane protease; Surface-expressed protease

Specificity

This assay has high sensitivity and excellent specificity for detection of Fibroblast Activation Protein Alpha (FAPa).
No significant cross-reactivity or interference between Fibroblast Activation Protein Alpha (FAPa) and analogues was observed.

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Fibroblast Activation Protein Alpha (FAPa) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Fibroblast Activation Protein Alpha (FAPa) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Reagents and materials provided

Reagents Quantity Reagents Quantity
Pre-coated, ready to use 96-well strip plate 1 Plate sealer for 96 wells 4
Standard 2 Standard Diluent 1×20mL
Detection Reagent A 1×120µL Assay Diluent A 1×12mL
Detection Reagent B 1×120µL Assay Diluent B 1×12mL
TMB Substrate 1×9mL Stop Solution 1×6mL
Wash Buffer (30 × concentrate) 1×20mL Instruction manual 1

Assay procedure summary

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

GIVEAWAYS

INCREMENT SERVICES

Magazine Citations
Reprod Sci Increased Expression of Fibroblast Activation Protein is Associated with Autophagy Dysregulation and Oxidative Stress in Obese Women with Uterine Fibroids 34845667
Catalog No. Related products for research use of Homo sapiens (Human) Organism species Applications (RESEARCH USE ONLY!)
RPC469Hu01 Recombinant Fibroblast Activation Protein Alpha (FAPa) Positive Control; Immunogen; SDS-PAGE; WB.
PAC469Hu01 Polyclonal Antibody to Fibroblast Activation Protein Alpha (FAPa) WB; IHC; ICC; IP.
MAC469Hu22 Monoclonal Antibody to Fibroblast Activation Protein Alpha (FAPa) WB
MAC469Hu25 Monoclonal Antibody to Fibroblast Activation Protein Alpha (FAPa) WB
MAC469Hu21 Monoclonal Antibody to Fibroblast Activation Protein Alpha (FAPa) WB; IHC; ICC; IP.
MAC469Hu23 Monoclonal Antibody to Fibroblast Activation Protein Alpha (FAPa) WB; IHC; ICC; IP.
MAC469Hu24 Monoclonal Antibody to Fibroblast Activation Protein Alpha (FAPa) IHC
SEC469Hu ELISA Kit for Fibroblast Activation Protein Alpha (FAPa) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC469Hu Multiplex Assay Kit for Fibroblast Activation Protein Alpha (FAPa) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.